ss square bar

Features of Decoration Stainless Steel Sheet： 1) Treatment: Hot Rolled and Cold Rolled 2) Stainless Steel Normal Material Grade:200 / 300 /400 series (201, 202, 301, 304, 304L, 316, 316L, 321, 309S, 310S, 904L, 410, 420, 430, 3Cr13 and so on...) 3) Surface:No.1 / 2B / No.4 / HL / Brushed / BA / 8K Mirror / Embossed / Etched etc. (With Paper or PVC film to protection) 4) Thickness Range: 0.3-120mm ( Cold Rolled Process ) 3 - 100mm or more (Hot Rolled Process) 5) Edge:Slit edge & Mill edge 6)...

Features: silvery white, matte Manufacturing method and Summary: hot rolled surface treated with heat treatment and pickling. Application: industrial tank, chemical industrial plant, etc. Thickness ranges from 3.0mm to 10.0mm.No need for a glossy finish 304L 304L stainless steel, also known as ultra-low carbon stainless steel, is a universal stainless steel material, widely used in the production of good comprehensive performance (corrosion resistance and formability) equipment and components....

304 304 stainless steel is a common material in stainless steel with a density of 7.93 g/cm, also known in the industry as 18/8 stainless steel.High temperature resistance 800℃, with the characteristics of good processing performance, high toughness, widely used in the industrial and furniture decoration industry and food and medical industry. Tensile strength b (MPa)≥515-1035 304 stainless steel atlas 304 stainless steel atlas (6 sheets) The yield strength is 0.2 (MPa)≥205 Elongation = 5...

304 304 stainless steel is a common material in stainless steel with a density of 7.93 g/cm, also known in the industry as 18/8 stainless steel.High temperature resistance 800℃, with the characteristics of good processing performance, high toughness, widely used in the industrial and furniture decoration industry and food and medical industry. Tensile strength b (MPa)≥515-1035 304 stainless steel atlas 304 stainless steel atlas (6 sheets) The yield strength is 0.2 (MPa)≥205 Elongation = 5...

304 Tensile strength b (MPa)≥515-1035 304 stainless steel atlas 304 stainless steel atlas (6 sheets) The yield strength is 0.2 (MPa)≥205 Elongation = 5 (%)≥40 Reduction of area bits of p (%)? Hardness: 201 HBW or less; 92 HRB or less; 210 hv or less Density (20℃, g/cm) : 7.93 Melting point (℃) : 1398~1454 Specific heat capacity (0~100℃, KJ· kg-1k-1) : 0.50 Thermal conductivity (W·m-1· k-1) :(100℃) 16.3, (500℃) 21.5 Linear expansion coefficient (10-6· k-1) :(0~100℃) 17.2, (0~500℃) 18.4...

304 Tensile strength b (MPa)≥515-1035 304 stainless steel atlas 304 stainless steel atlas (6 sheets) The yield strength is 0.2 (MPa)≥205 Elongation = 5 (%)≥40 Reduction of area bits of p (%)? Hardness: 201 HBW or less; 92 HRB or less; 210 hv or less Density (20℃, g/cm) : 7.93 Melting point (℃) : 1398~1454 Specific heat capacity (0~100℃, KJ· kg-1k-1) : 0.50 Thermal conductivity (W·m-1· k-1) :(100℃) 16.3, (500℃) 21.5 Linear expansion coefficient (10-6· k-1) :(0~100℃) 17.2, (0~500℃) 18.4...

The specifications are complete and the price is favorable. Our company can order various non-standard specifications on behalf of customers. , special material steel products, can be delivered to your door, ordering quickly. Our main products including stainless steel pipe ,stainless steel plate , stainless steel bar , stainless steel coil , stainless steel round bar , Stainless steel square tube ,stainless i-beam , stainless angle steel , stainless steel channel , Hastelloy alloy , etc . Our...

Wuxi Zhonglian Yongsheng Special Steel Co., Ltd. will serve the majority of users with good reputation, strong strength, high quality products and low price. I would like to express my heartfelt thanks to the old and new friends and customers who have always cared, supported and helped the company! And sincerely hope to establish long-term cooperative relations with them, mutual benefit and common development .

304L 304L stainless steel, also known as ultra-low carbon stainless steel, is a universal stainless steel material, widely used in the production of good comprehensive performance (corrosion resistance and formability) equipment and components. C：≤0.03 ， Si ：≤1.0 ， Mn ：≤2.0 ， Cr ：18.0～20.0 ， Ni ：9.0～12.0， S ：≤0.03 ， P ：≤0.045 Features of Decoration Stainless Steel Sheet： 1) Treatment: Hot Rolled and Cold Rolled 2) Stainless Steel Normal Material Grade:200 / 300 /400 series (201, 202, 301, 304,...

310S 310S (old brand 0Cr25Ni20/ new brand 06Cr25Ni20) is austenitic chrome-nickel stainless steel with good oxidation resistance and corrosion resistance, because of the higher percentage of chromium and nickel, 310S has much better creep strength, can continue to work at high temperature, with good high temperature resistance. C :≤0.08， Si :≤1.500， Mn :≤2.00， P :≤0.035， S :≤0.030， Ni :≤19.00-22.00， Cr :≤24.00-26.00 Features of Decoration 310s Stainless Steel Sheet： 1) Treatment: Hot Rolled and...

316L 316L is widely used in the chemical industry due to its excellent corrosion resistance. 316L is also a derivative of 18-8 austenitic stainless steel, with 2 ~ 3% Mo element added. On the basis of 316L, many kinds of steel are also derived, such as 316Ti after adding a small amount of Ti, 316N after adding a small amount of N, and 317L after increasing the content of Ni and Mo. C ：≤0.030 Si： ≤1.00 Mn：≤2.00 S ： ≤0.030 P ： ≤0.045 Cr：16.00～18.00 Ni：10.00～14.00 Mo：2.00～3.00 Features of...

316ti 316TI, a metallic material, is added to SUS316 steel to improve its resistance to intergranular corrosion.Used to resist sulfuric acid, phosphoric acid, acetic acid, acetic acid equipment. C：≤0.08 Si≤1.00 Mn≤2.00 P≤0.035 S≤0.030 Ni 11.00~14.00 Cr 16.00~19.00 Mo 1.80~2.50 Ti≥0.2~0.70 Features of Decoration Stainless Steel Sheet： 1) Treatment: Hot Rolled and Cold Rolled 2) Stainless Steel Normal Material Grade:200 / 300 /400 series (201, 202, 301, 304, 304L, 316, 316L, 321, 309S, 310S,...

321 A material of stainless steel.The specific introduction is as follows:Chemical composition: carbon: 0.08 silicon: 1.00 manganese: 2.00 phosphorus: 0.045 sulfur: 0.030 nickel: 9.00-12.00 chromium: 17.00-19.00 titanium: 5c-0.70German brand number: X10CrNiTi189Austenitic stainless steel is equivalent to domestic brand 0Cr18Ni10Ti 321 stainless steel is ni-cr-mo austenitic stainless steel, its performance is very similar to 304, but due to the addition of metal titanium, it has a better...

Features: silvery white, matte Manufacturing method and Summary: hot rolled surface treated with heat treatment and pickling. Application: industrial tank, chemical industrial plant, etc. Thickness ranges from 3.0mm to 10.0mm.No need for a glossy finish 316 316 stainless steel, 18cr-12ni-2.5 Mo due to the addition of Mo, so its corrosion resistance, atmospheric corrosion resistance and high temperature strength is particularly good, can be used in harsh conditions; Excellent work hardening...

347H 347H austenitic stainless hot strength steel, with good corrosion resistance, welding performance and thermal strength.347H stainless steel for large boiler superheater, reheater, steam pipe, petrochemical heat exchanger pipe fitting.347H chemical compositionC: 0.04 ~ 0.10Mn: 2.00 or lessSi Si: 0.75 or lessChromium Cr: 17.0 ~ 19.0Ni (2) : 9.0 ~ 13.0P: 0.045 or lessS: 0.03 or lessNb: (8 ~ 1.00 c) C: 0.95 ~ 1.20Si: 1.00 or lessMn: 1.00 or lessS: 0.030 or lessP: 0.035 or lessCr: 16.00 ~...

Features of Decoration 410 Stainless Steel Sheet： 1) Treatment: Hot Rolled and Cold Rolled 2) Stainless Steel Normal Material Grade:200 / 300 /400 series (201, 202, 301, 304, 304L, 316, 316L, 321, 309S, 310S, 904L, 410, 420, 430, 3Cr13 and so on...) 3) Surface:No.1 / 2B / No.4 / HL / Brushed / BA / 8K Mirror / Embossed / Etched etc. (With Paper or PVC film to protection) 4) Thickness Range: 0.3-120mm ( Cold Rolled Process ) 3 - 100mm or more (Hot Rolled Process) 5) Edge:Slit edge & Mill...

2507 The 2507 is a ferrite - austenitic (duplex) stainless steel with excellent resistance to pitting, slot and uniform corrosion. chemical component: C≤0.03 、Si≤0.80 、Mn≤1.2 、Cr:24-26 、Ni:6-8 、S≤0.02 、P≤0.035 、Mo:3-5 、N：0.24-0.32 Features of Decoration 2507 Stainless Steel Sheet： 1) Treatment: Hot Rolled and Cold Rolled 2) Stainless Steel Normal Material Grade:200 / 300 /400 series (201, 202, 301, 304, 304L, 316, 316L, 321, 309S, 310S, 904L, 410, 420, 430, 3Cr13 and so on...) 3) Surface:No.1 /...

430 430LX adds Ti or Nb to 430 steel, reduces C content, improves processing performance and welding performance, mainly used for hot water tank, heating water system, sanitary appliances, household durable appliances, bicycle flywheel and so on. Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, the chromium content is slightly lower and the hardness is correspondingly lower. 430 stainless steel is a universal steel with good corrosion resistance,...

2205 Duplex stainless steel 2205 standard no. : ASTM A240/A240M--01 duplex stainless steel 2205 is a composite stainless steel consisting of 22% chromium, 2.5% molybdenum and 4.5% nickel-nitrogen alloys. It has high strength, good impact toughness and good overall and local resistance to stress corrosion. chemical component: C≤0.030 Mn≤2.00 Si≤1.00 p≤0.030 S≤0.020 Cr 22.0 ~ 23.0 Ni 4.5 ~ 6.5 Mo3.0 ~ 3.5 N0.14 ~ 0.20 Features: silvery white, matte Manufacturing method and Summary: hot rolled...

904L 904L (N08904,14539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel and 4.5% molybdenum. It has good activity-passivation conversion ability and excellent corrosion resistance. It has good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid and phosphoric acid, good pitting resistance in neutral chlorine-containing medium, and good crack corrosion resistance and stress corrosion resistance. Suitable for various...